Trekkrunner ES-409 - Installation

4.Installation
STEP 9
1.Attach pull up left,right arm(52,53)
to vertical tube (59) using Hex
bolts M10x50(74-2sets)
washers and nuts.
2.Insert handle bar(16) into pull up
left,right arm(55,56) using Hex
bolts M10x20 (78-2sets)
washers and nuts..
1.Attach sit up bench frame(64) to
vertical tube (59) using locking
pin(85)
STEP 10
1.Attach push up left,
right arm(55,56) to
back base tube (2)
using Hex bolts
M10x90(71-2sets)
washers and nuts.