JOINT
■
Made from durable 10mm
thick phenolic.
■
Alloy location bushes.
■
Preset widths.
Requires:
■
12.7mm (1/2”) collet plunge
router.
■
12.7mm (1/2”) x 50mm TCT
router cutter Ref. 3/83DX1/2TC
■
30mm guide bush Ref. GB30.
■
Universal sub-base for guide
bush Ref. UNIBASE
*
.
■
Two 100mm (4”) throat clamps
Ref. FC/200.
■
Panel bolt connectors
Ref. PC/10/M.
COMBI600
WORKTOP WIDTHS
225mm 500mm
325mm 600mm
300mm 616mm
400mm
*
For certain makes & models of router.
Router cutter & worktop not included.
To Next Page
Need help?
General
