TREND Thermistor TBTI - User Manual

TB/TI Thermistor Insertion Temperature Sensor Installation Instructions TG200727 Issue 5, 07-Mar-2016. 1
Installation Instructions
TB/TI
Thermistor Insertion Temperature Sensor
Important: Retain these instructions
These instructions shall be used by trained service
personnel only.
If the equipment is used in a manner not
specied by these instructions, the protection provided by the
equipment may be impaired.
https://partners.trendcontrols.com
1
Dimensions
2 INSTALLATION
1 BOX CONTENTS
TB/TI Thermistor Insertion
Temperature Sensor Installation
Instructions (TG200727)
6 mm (0.24”)
400 mm (15.75”)
94 mm (3.70”)
57 mm (2.24”)
113 mm (4.45”)
50 mm
(1.97”)
6 mm compression
tting
3 x 4 mm diam. holes
on a 30 mm (1.18”) PCD
(Pitch Circle Diameter)
Mounting ange for use as duct sensor (ACC/DF)
clip
brass brush
hexagonal
socket 2 mm
grub screw
Universal Fitting Kit for immersion sensor
use in existing pockets (ACC/UF)
spring
Pockets for use as immersion sensor: Brass (WB150 or WB50); Stainless Steel (WS150 or WS50)
135 mm (5.31”)
14 mm
(0.53”)
24 mm
(0.95”)
Ø8 mm
(0.31”)
143 mm (5.63”)
Ø6.5 mm (0.25”)
G½” (BSPP)
CONTENTS
1 Box Contents .................................................................1
2 Installation .....................................................................1
3 Cleaning and Maintenance ...........................................7
4 Disposal .........................................................................8
150 mm (5.91”)
70 mm (2.76”)
50 mm (1.97”)
58 mm (2.28”)
WB150, WS150 WB50, WS50
TB/TI/ESTB/TI/S
TB/TI/L

TREND Thermistor TBTI Specifications