RS-WMB, RD-WMB Installation Instructions TG201349 Issue 4, 26-Aug-2015. Applies to 1.02.2. 1
Installation Instructions
RS-WMB, RD-WMB
Room Display
Important: Retain these instructions
These instructions shall be used by trained service
personnel only.
If the equipment is used in a manner not
speci ed by these instructions, the protection provided by the
equipment may be impaired.
https://partners.trendcontrols.com
GB DE DK FIES FR
IT NL NO RU
PL SE
1
Dimensions
2
Mounting Requirements
3 INSTALLATION
1 BOX CONTENTS 2 STORING
CONTENTS
1 Box contents ..................................................................1
2 Storing ...........................................................................1
3 Installation .....................................................................1
4 Disposal .........................................................................8
5 Security .........................................................................8
RS-WMB, RD-WMB Installation
Instructions (TG201349)
+65.5 °C
(+150 °F)
0
-40 °C
(-40 °F)
95 %RH
It is recommended that the installation should comply
with the local electrical safety installation practices (e.g.
HSE Memorandum of Guidance on Electricity at Work
Regulations 1989, USA National Electric Code).
continued over page
Note: Display and buttons only present on RD-WMB, not
RS-WMB.
84 mm (3-5/16”)
117 mm (4-5/8”)
24 mm (15/16”)
> 50 cm (1’6”)
1.5 m (5’)
To Next Page
Need help?
General
