30
4.3.2 Advanced: Virtual Server
Enable
Specifies whether the entry will be active or inactive.
Name
Assign a meaningful name to the virtual server, for example Web Server. Several well-known
types of virtual server are available from the "Application Name" drop-down list. Selecting one
of these entries fills some of the remaining parameters with standard values for that type of
server.
IP Address
The IP address of the system on your internal network that will provide the virtual service, for
example 192.168.10.50. You can select a computer from the list of DHCP clients in the
"Computer Name" drop-down menu, or you can manually enter the IP address of the server
computer.
Protocol
Select the protocol used by the service. The common choices -- UDP, TCP, and both UDP and
TCP -- can be selected from the drop-down menu. To specify any other protocol, select "Other"
from the list, then enter the corresponding protocol number (as assigned by the IANA) in the
Protocol box.
To Next Page
Loading...
Need help?
General
