N300 PoE Access Point (TEW-755AP)
Standards
IEEE 802.1Q
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3ab
IEEE 802.3af
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n (up to 300 Mbps)
Device Interface
1 x PoE Gigabit LAN port
Power port (optional non-PoE installation)
Reset button
LED indicators
Mounting plate
Special Features
WiFi traffic shaping
802.1Q VLAN assignment per SSID
IPv6 support (Link-Local, Static IPv6, Auto-Configuration (SLAAC/DHCPv6)
Multi-Language interface, English, French, Spanish, German, Russian
LEDs on/off
Captive Portal (External Coovachilli server authentication)
Internal Captive Portal (Local user account authentication and customizable
portal page)
802.11k radio resource management
RSSI Scanner (Client signal strength and tolerance)
Operation Modes
Access Point
Client
WDS AP
WDS Bridge
WDS Station
Repeater
Management/Monitoring
Web based management
SNMP v1/v3
STP
Event logging
Ping test
Traceroute
CLI
Access Control
Wireless encryption: WEP, WPA/WPA2-PSK, WPA/WPA2-RADIUS
MAC filter
Maximum client limit
QoS
WMM
Traffic shaping per SSID
SSID
Up to 8 SSIDs per access point
Frequency
2.4 GHz: 2.412 - 2.472 GHz
Wireless Channels
2.4 GHz: FCC: 1-11, ETSI: 1 – 13
Modulation
DBPSK/DQPSK/CCK for DSSS technique
BPSK/QPSK/16-QAM/64-QAM for OFDM technique
Antenna Gain
2.4 GHz: 2 x 4 dBi