2
2. Installation
2. Connect your computer's network port to one of the modem's LAN ports.
3. Connect the power adapter to the modem, and then to a power outlet. Push the power switch
to the ON position.
1. Connect the RJ-11 telephone cable to the TEW-816DRM modem's VDSL/ADSL port, then into
a phone jack.
Internet
3
1
2
3
4. To confirm that the device is fully functional, verify that the status LED indicators on the front of
the modem are lit: Power (Green), DSL (Green), Wireless (Green) and the LAN port (1, 2, 3,
4) your computer is connected (Green).
To Next Page
Loading...
Need help?
General
