6
1. Open your web browser, type http://192.168.10.1 into the address bar of your web browser,
and press enter.
2. Log in using default Username and Password located on the front sticker or the label on the
back of the modem.
3. Once you are logged in, click Setup, and then click Setup Wizard to start configuring the
modem.
Note: It is recommended that you configure the modem from a wired computer.
4. ADSL Setup
Note: In the example below, we will be configuring an ADSL connection type with PPPoE. If you
are unsure of your connection type, contact your Internet Service Provider.
Preset
Wireless Settings
Wi-Fi Name/SSID
Wi-Fi Key
XXXXXXXXXXXXX
Management Login
192.168.10.1
username: admin
password: XXXXXX
Preset
Wireless Settings
(N/B/G)
TRENDnetXXX_2.4GHz_XXXX