10
10. For Authentication method, select WPA/WPA2-PSK. For the WPA Cipher, select AES and
enter the Pre-Shared Key required to connect to your wireless network. Click OK.
Note: The pre-shared key is the key/password (8-63 alphanumeric characters) client devices
will be required to enter in order to connect to your wireless network.
11. The initial wireless settings are complete.
Note: The access points must be connected to the same IP subnet as your wireless controller.
(e.g. 192.168.10.x / 255.255.255.0)
For detailed information regarding advanced settings, please refer to the User's Guide found on
the included CD.
8. In the Edit Wireless Group window, enter the wireless network name/SSID for the wireless
network. (e.g. TRENDnet-WiFi)
Note: The SSID is the wireless network name used to broadcast and be discovered by your
wireless client devices to connect to your wireless network.
7. In the list below, click Create to create a new wireless profile.
9. For Roaming options, select 802.11k and OKC wireless roaming protocols to ensure
fast transition wireless connectivity for client devices when roaming between multiple access
points.
To Next Page
Loading...
Need help?
General
