TRENDnet TEW-WLC100 Quick Installation Guide

ENGLISHFRANÇAISDEUTSCH
ESPAÑOLРORTUGUÊS
7
3. Connect your wireless access points
Important Note: Please make sure your access points have met the requirements in Section 1.
1. Using an Ethernet cable, connect each wireless access point to the wireless controller or your
network.
Note: If powering the access points using their power adapters, you can connect the access
points directly to your network or the wireless controller. If powering the access point using
power over Ethernet (PoE), you can connect your access points to your network or to the
wireless controller using a separate PoE injector (not included) or PoE/PoE+ switch (not
included).
OR OR
Access Point
Power
Network
PoE Injector
Access Point
Network
PoE Switch
Access Point
Network

TRENDnet TEW-WLC100 Specifications

General

Brand	TRENDnet
Model	TEW-WLC100
Category	Network Router
Language	English