- 24 - Rev. 1.00.2.1.63
n = 14 44000 BPS
n = 15 45333 BPS
n = 16 46666 BPS
n = 17 48000 BPS
n = 18 49333 BPS
n = 19 50666 BPS
n = 20 52000 BPS
n = 21 53333 BPS
-V90? Reports current V.90 setting
\A0 Set maximum MNP block size to 64 characters
\A1 Set maximum MNP block size to 128 characters
\A2 Set maximum MNP block size to 192 characters
\A3 Set maximum MNP block size to 256 characters
\Bn Transmit break in n*100ms (n = 0-9)
\G0 Disables XON/XOFF flow control between local and remote modems
\G1 Enables XON/XOFF flow control between local and remote modems
\J0 Disables DTE speed adjust
\J1 Enables DTE speed adjust
\Kn Set break control (n=0-5, default is 5).
\N0 Select normal mode
\N1 Select normal mode
\N2 Select MNP reliable mode
\N3 Select V.42 auto-reliable mode
\N4 Select V.42 reliable mode
\Q0 Disables flow control
\Q1 Enables XON/XOFF software flow control
\Q2 Enables CTS hardware flow control
\Q3 Enables CTS/RTS hardware flow control
\Tn Set inactivity timer in minutes(n=0-255, default is 0)
\V0 Disables protocol result code appended to DCE speed
\V1 Enables protocol result code appended to DCE speed
\X0 Process XON/XOFF character as flow control character only
\X1 Process XON/XOFF character as flow control character and pass through to local DTE
or remote modem
Notes:
The default setting of commands is in bold Italic text format.
AT Command prefix
To Next Page
Loading...
