EasyManua.ls Logo

TRENDnet TPE-30284 - User Manual

TRENDnet TPE-30284
169 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TRENDnet Users Guide
Cover Page

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the TRENDnet TPE-30284 and is the answer not in the manual?

Summary

Switch Installation

Setup Wizard

Basic IP Configuration

Access your switch management page

Details how to access the switch's web management page using its IP address and default credentials.

System

IP Access List

Defines or restricts access to the switch management page to specific IP addresses.

Network

Voice VLAN

Guides configuration of Voice VLAN parameters, including VLAN ID, aging time, and CoS.

QoS (Quality of Service)

Scheduling Algorithm

Configures the scheduling algorithm (Strict Priority or WRR) for packet transmission from queues.

PoE (Power over Ethernet)

Configure PoE settings

Manages PoE settings per port, including power budget, consumption, management method, and priority.

Configure PD Alive Check

Enables checking the connection to connected devices and attempts to revive unresponsive devices.

Security

Port Security Global Settings

Configures global port security settings, including state, maximum MAC addresses, and aging time.

Port Access Control

Controls network access by requiring user authentication (username/password) for switch ports.

Summary

Switch Installation

Setup Wizard

Basic IP Configuration

Access your switch management page

Details how to access the switch's web management page using its IP address and default credentials.

System

IP Access List

Defines or restricts access to the switch management page to specific IP addresses.

Network

Voice VLAN

Guides configuration of Voice VLAN parameters, including VLAN ID, aging time, and CoS.

QoS (Quality of Service)

Scheduling Algorithm

Configures the scheduling algorithm (Strict Priority or WRR) for packet transmission from queues.

PoE (Power over Ethernet)

Configure PoE settings

Manages PoE settings per port, including power budget, consumption, management method, and priority.

Configure PD Alive Check

Enables checking the connection to connected devices and attempts to revive unresponsive devices.

Security

Port Security Global Settings

Configures global port security settings, including state, maximum MAC addresses, and aging time.

Port Access Control

Controls network access by requiring user authentication (username/password) for switch ports.

TRENDnet TPE-30284 Specifications

General IconGeneral
Total PoE Power Budget370 W
Switching Capacity56 Gbps
Forwarding Rate41.7 Mpps
Jumbo Frame9 KB
MAC Address Table8K
Power Input100 - 240VAC, 50/60Hz
Power over Ethernet (PoE)PoE+
Dimensions17.3 x 9.8 x 1.7 in.
Operating Temperature0 – 40 °C (32 – 104 °F)
Humidity10% to 90% (Non-Condensing)
Power SupplyInternal
Ports28 x Gigabit Ethernet ports (24 PoE+ ports, 4 SFP slots)

Related product manuals