TRENDnet TPE-LG80 User Manual

Quick Installation Guide
8-Port GigabitLong RangePoE+ Switch
TPE-LG80
Power
a
POECamera
PoE Camera
POEAccess Point
1OOm(1Gbps)
TPE-LG80
Network video recorder
100m (1Gbps)
DIP Switch Behavior
DIP Switch
0
12345678
200m (10Mbps)
200m (l orvlbps)
Status
ON
1
2
3
4
5
6
7
8
Note:
Port 1 & 2 long rangePoE+
OFF
ON
Port 3 & 4 long rangePoE+
OFF
ON
VLANport isolation
OFF
ON
QoS
OFF
ON
Port 5 long range PoE+
OFF
ON
Port 6 long range PoE+
OFF
ON
Port 7 long range PoE+
OFF
ON
VLAN port isolation
OFF
Network
Behavior
ExtendPoE+distance upto 200m at 10Mbps
GigabitPoE+distanceup to 100m
Extend PoE+ distance up to 200m at 10Mbps
GigabitPoE+distanceup to 100m
VLANport isolationfor ports 1-4
VLANport isolationoff
QoSEnabled(Video& Voice- High Priority)
QoS Disabled
Extend PoE+ distance up to 200m at 10Mbps
GigabitPoE+distanceup to 100m
ExtendPoE+distance upto 200m at 10Mbps
GigabitPoE+distanceup to 100m
Extend PoE+ distance up to 200m at 10Mbps
GigabitPoE+distanceup to 100m
VLAN port isolation for ports 5-7
VLANport isolationoff
1. After changing DIPswitch settings, the switch needs to be rebooted for changes to be applied.
2. DIP switches 3 and 8 cannot be enabled at the same time.

TRENDnet TPE-LG80 Specifications

General

Power over Ethernet (PoE)	Yes
Switching Capacity	16 Gbps
Forwarding Rate	11.9 Mpps
Housing	Metal
Switch Type	Unmanaged
Jumbo Frame	9K bytes
Mounting	Desktop
Operating Temperature	0 – 40 °C (32 – 104 °F)
Humidity	Max. 95% (non-condensing)
Power Supply	Internal
Ports	8 x 10/100/1000 Mbps Gigabit Ethernet ports
Dimensions	210 x 110 x 26 mm