Need help?Do you have a question about the TRENDnet TPE-5240WS and is the answer not in the manual?
General| 10G support | No |
|---|---|
| Full duplex | Yes |
| Number of VLANs | 256 |
| Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Virtual LAN features | Private VLAN |
| Combo SFP ports quantity | 4 |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 48 |
| Form factor | 1U |
| Certification | CE, FCC |
| Product color | Black |
| Number of fans | 3 fan(s) |
| Housing material | Metal |
| Total Power over Ethernet (PoE) budget | 370 W |
| Noise level | 52.4 dB |
| Maximum data transfer rate | 2000 Mbit/s |
| Compatible operating systems | Windows 10, 8.1, 8, 7, Vista, XP, Windows 2003/2008 Server |
| Mean time between failures (MTBF) | 239897 h |
| Throughput | 77.4 Mpps |
| Jumbo frames | 10000 |
| MAC address table | 16000 entries |
| Packet buffer memory | 1.5 MB |
| Security algorithms | 802.1x RADIUS |
| Switch type | Managed |
| Multicast MAC address table | 256 entries |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 479 W |
| Operating temperature (T-T) | -5 - 50 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Cables included | AC |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 430 mm |
|---|---|
| Width | 440 mm |
| Height | 44 mm |
| Weight | 6120 g |
Configure the initial IP address and network settings for the switch.
Guide to accessing the switch's web-based management interface.
Configure STP, RSTP, or MSTP to prevent network loops.
Manage Power over Ethernet (PoE) settings for connected devices.
Configure port security to limit access based on MAC addresses.
Implement 802.1X port-based access control for network security.
Configure Access Control Lists to filter and manage network traffic.
Update the switch's firmware to add features or fix issues.
Backup and restore switch configuration settings for disaster recovery.
To Next Page