TRENDnet TPL-402E - 1.6 Ethernet Port;Buttons

1.6 Ethernet Port/Buttons
There is one RJ-45 10/100/1000Mbps Auto-MDIX Gigabit Ethernet port, Reset Button,
and Sync Button located at the bottom of the device.
Button
Action
Function
Sync
Push/Hold for 2
sec
Initiate Sync/Connection and generate random network name/key
on first adapter (PWR LED will start blinking)
Match network name/key on secondary or additional adapter and
connect to first adapter. (PWR LED will start blinking)
Note: The secondary or additional powerline adapter’s Sync button
must also be pushed within 2 minutes (120 sec) of pushing the Sync
button of the first adapter in order to establish connectivity.
Push/Hold for
10 sec
Erases the network name/key
(All LEDs will turn off and turn back on)
Reset
Push/Hold for 1
sec
Reset device to factory defaults (All LEDs will turn off and turn back
on)
Note: Will reset to the factory default private network name
“HomePlugAV”
Ethernet Port
Reset Button
Sync Button