Need help?Do you have a question about the Trianco Activair and is the answer not in the manual?
Crucial health and safety guidance for users, installers, and engineers.
Essential instructions to prevent harm and damage during operation and installation.
Critical safety warnings to be strictly followed during installation and operation.
Important cautions regarding unit usage, handling, and environmental factors.
Step-by-step guide on how to report appliance faults and breakdowns.
Details for contacting the service center and technical support.
Emphasizes the critical nature of selecting the correct heat pump size.
Provides heating capacity, power input, and COP data for different models and conditions.
Physical dimensions and visual layout for the 9kW Activair heat pump.
Physical dimensions and visual layout for the 15kW Activair heat pump.
Physical dimensions and visual layout for the 22kW Activair heat pump.
Specifies minimum clearance distances (A, B, C, D) around the unit for proper operation.
Provides recommendations for selecting the optimal location for the outdoor unit.
Lists the components included with the heat pump unit.
Lists relevant British Standards for heating systems and installation compliance.
Illustrates a basic installation configuration for a heat-only system with a buffer tank.
Shows a system configuration for heating and domestic hot water with a buffer tank.
Depicts a system setup for heating and ASHP-controlled hot water using a buffer tank.
Provides a chart to determine expansion vessel volume based on system water content and pressure.
Details the requirements and placement for the safety valve and its drain.
Specifies the use of flexible hoses and isolation valves for system connections.
Details the requirement for a pressure gauge and system filling provisions.
Covers the need for a drain tapping and an in-line filter for system maintenance.
Explains condensate drainage and control via the Warm Link App.
Instructions for connecting the main power supply and routing cables safely.
Specifies the correct MCB ratings and minimum cable sizes for different heat pump models.
Details how to connect the user interface and the buffer sensor (NTC).
Explains the connection and function of the optional Domestic Hot Water NTC sensor.
Describes the connection and configuration for controlling a 3-port diverter valve for hot water.
Details the connection and configuration for electric heater backup systems.
Lists essential checks to perform before starting the heat pump.
Guides on selecting the correct operation mode (Heating, Hot Water + Heating).
Instructions for starting the unit and observing its performance during initial operation.
Lists and defines various components and their abbreviations used in the wiring diagram.
Presents the detailed internal wiring diagram for the heat pump control board.
Explains the layout and primary display elements of the user interface.
Details the core functions accessible via the main interface buttons.
Describes secondary functions and icons available on the user interface.
Instructions on how to turn the heat pump unit on and off using the interface.
Guides on choosing between different operational modes like Heating or Hot Water.
How to set desired temperatures for Hot Water and Heating.
Steps for unlocking and accessing advanced system settings via password.
Overview of the main options within the System Settings menu.
Details how to set the system time, mute timer, and power timer.
Instructions for setting up daily heating and cooling schedules using timers.
How to view historical temperature data and operational curves.
How to modify the brightness of the unit's display screen.
Information on checking the current operating state and parameters of the unit.
How to view and manage logged fault codes and descriptions.
Guides on enabling and configuring weather-based temperature compensation.
Essential inspections before first use or after shutdown.
Safe methods for cleaning the unit, avoiding damage.
Annual service tasks to be performed by a competent person.
Warning about the risks associated with R290 refrigerant leaks.
Table listing common fault issues, possible causes, related components, and solutions.
Explains error codes E01 through E29, their causes, and resolutions.
Details error codes E032 through F09, including possible causes and solutions.
Covers error codes F10 through F25, providing explanations and troubleshooting steps.
Lists error codes F26 through P191 with relevant information and resolution steps.
Comprehensive technical specifications for Activair 9kW, 15kW, and 22kW models.
To Next Page
General