EasyManua.ls Logo

Trianco Greenflame 18kW User Manual

Trianco Greenflame 18kW
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Greenflame Slim Wood Pellet Boiler 18kW
1
Greenflame Slim Wood Pellet Boiler 18kW
Internal & External
Installation, Operation and Servicing Instructions
PLEASE NOTE:
This product MUST be commissioned by a T R Engineering Ltd approved engineer.
INSTALLER
Have you been trained by T R Engineering Ltd to commission this appliance?
If you intend to commission and do not have a T R Engineering Ltd Cert No. Call now to
arrange training on 0114 257 2300
Please read these instructions carefully before installing and operating this appliance.
TO BE RETAINED BY THE HOUSEHOLDER

Table of Contents

Other manuals for Trianco Greenflame 18kW

Question and Answer IconNeed help?

Do you have a question about the Trianco Greenflame 18kW and is the answer not in the manual?

Trianco Greenflame 18kW Specifications

General IconGeneral
BrandTrianco
ModelGreenflame 18kW
CategoryBoiler
LanguageEnglish

Summary

Introduction and Manual Usage

Manual Usage Guidance

Guidance on maintaining and accessing the instruction manual.

Safety, Warnings, and Guarantees

Safety Instructions

Crucial safety guidelines for installation, operation, and maintenance.

Operating Warnings

Key warnings for safe operation and preventing damage.

Guarantee/Warranty Details

Details on warranty coverage, limitations, and exclusions.

Customer Handover Requirements

Information and training requirements for the end-user.

After Sales Service and Support

Reporting a Fault

Procedure for reporting malfunctions and service requests.

Technical Assistance Information

Contact information and advice for technical support.

Boiler Operation Modes

OFF Mode, Check-Up, and Ignition

Description of OFF state, pre-ignition cleaning, and ignition phases.

Stabilisation, Recover Ignition, Work Mode, and Modulation

Phases for flame stabilization, recovery, normal work, and modulation.

Standby, Safety, and Extinguishing

Boiler standby, safety functions, and shutdown procedures.

Installation and Setup

Pre-Installation Considerations

Fuel requirements, site selection, and environmental needs.

Flue System Connection

Critical aspects of flue connection for efficient and safe operation.

Plumbing and Electrical Connections

Instructions for connecting the boiler to water and electrical systems.

Control Panel and System Schematics

Diagrams and wiring details for the control panel and systems.

Optional Auger and Vacuum System Set-Up

Setup instructions for optional auger and vacuum systems.

Control System Configuration

System Menu Navigation

Overview and navigation of the boiler's system menu.

Fan, Auger, Thermostat, and Timer Settings

Configuration of fan speeds, auger times, thermostats, and timers.

Enables Menu, Deltas, and Pressure Thresholds

Activating functions, adjusting temperature differences, and pressure settings.

Error Codes, Diagnostics, and Output Tests

Troubleshooting with error codes and testing boiler components.

Operation and Maintenance

Starting, Stopping, Ash Removal, and Fueling

Procedures for boiler operation, ash removal, and fueling.

Technical Data

Specifications, dimensions, and performance data of the boiler.

Maintenance Schedule and Spares

Recommended servicing schedule and list of available spare parts.

Related product manuals