EasyManua.ls Logo

Trianco Contractor H.E. 50/90 EXTERNAL User Manual

Trianco Contractor H.E. 50/90 EXTERNAL
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
H.E. 50/90 EXTERNAL
HE. 100/125 EXTERNAL
OIL-FIRED CENTRAL HEATING BOILER
Question and Answer IconNeed help?

Do you have a question about the Trianco Contractor H.E. 50/90 EXTERNAL and is the answer not in the manual?

Trianco Contractor H.E. 50/90 EXTERNAL Specifications

General IconGeneral
BrandTrianco
ModelContractor H.E. 50/90 EXTERNAL
CategoryBoiler
LanguageEnglish

Summary

HEALTH AND SAFETY

INFORMATION FOR THE INSTALLER AND SERVICE ENGINEERS

General safety information, COSHH regulations, and handling of materials.

USER INSTRUCTIONS

TO FIRE THE BOILER

Steps to start and operate the boiler for the first time.

TO STOP THE BOILER

Instructions on how to safely shut down the boiler.

BURNER LOCK-OUT

How the burner indicates and can be reset from a lockout condition.

CUSTOMER AFTER SALES SERVICE INFORMATION

REPORTING A FAULT

Step-by-step guide on how to report a fault with the appliance.

WHAT TO DO IN THE EVENT OF AN APPLIANCE FAULT OR BREAKDOWN

Procedures to follow when the appliance experiences a fault or breakdown.

INSTALLATION INSTRUCTIONS

INSTALLATION

ELECTRICAL SUPPLY

WIRING DIAGRAM

Diagram illustrating the boiler's electrical connections and components.

OIL SUPPLY

STORAGE TANK

Requirements for the oil storage tank, including size and location.

OIL SUPPLY PIPING CONFIGURATIONS

OIL SUPPLY PIPING CONFIGURATIONS (Continued)

FLUE DISCHARGE

FLUE ASSEMBLY

FITTING INSTRUCTIONS

Step-by-step guide for assembling and fitting the flue system.

COMMISSIONING

PROCEDURE

Detailed steps for commissioning the boiler correctly.

SERVICING

SERVICING (Continued)

SERVICING THE BOILER STEPS

Specific steps for performing annual boiler servicing.

FAULT-FINDING

BURNER WILL NOT START

Possible causes and actions for the burner failing to start.

BURNER STARTS BUT FLAME NOT ESTABLISHED

Causes and solutions when the flame is not properly established.

FLAME ESTABLISHED BUT BURNER LOCKS OUT AFTER A FEW SECONDS

Reasons and fixes for the burner locking out shortly after ignition.

FAULT-FINDING (Continued)

COMBUSTION FUMES SMELL

Reasons for combustion fumes smell and how to address them.

Related product manuals