This document is intended to be used by a
factory trained and qualified heating contractor
or service technician only. Read all Instructions
within this document and within the relevant
Boiler Installation and Maintenance Manual
before proceeding. It is recommended to follow
the procedures in the steps given. This guide does
not replace the Installation and Maintenance
manual. Skipping or missing procedural steps
could result in substantial property damage,
serious injury, or death.
WARNING
THE
ORIGINAL
INNOVATORS
Application
Guide
2020-52B - Instinct Application Book
February 25, 2021
• When receiving the Instinct unit, any claims for damage or shortage in shipment must be filed immediately against the
transportation company by the consignee.
• Customer must register unit within sixty (60) days of installation in order to gain warranty coverage. See Warranty Card for
details.
• Leave all documentation received with appliance with the owner for future reference.
• Installation and service should only be performed by a qualified installer or service technician.
• Installations and service should be performed by a licensed plumber or gas fitter in the Commonwealth of Massachusetts.
NOTICE
SOLO & COMBI
• This manual is applicable to all Instinct boilers with AB in the serial number after the S or C (e.g. IN110SAB000001) which also
operate with software version 0.36 / 0.60 or earlier.
• If this guide does not apply to your boiler, Please visit triangletube.com to obtain the correct application guide.
NOTICE
To Next Page
Need help?
General
