TriangleTube Prestige Solo 399 User Manual

WARNING
2008-37 Prestige Conc_AIrVentSup.
This document is intended to be used by a qualified heating contractor or service
technician. Read all instructions within this document and within the PRESTIGE
Boiler Installation and Maintenance Manual, before proceeding with the installa-
tion. It is recommended to follow the procedures in the steps given, skipping or
missing procedural steps could result in severe personal injury, death or sub-
stantial property damage.
Installation of this boiler must comply with local requirements and codes and
with the National Fuel Gas Code NFPA 54, ANSI Z223.1 for installations within the
U.S. For installations in Canada the installation must comply with CSA B149.1 or
B149.2
NOTICE
prestige
Solo 399
Concentric Vent/Air System Supplement
Date: 3/16/09

TriangleTube Prestige Solo 399 Specifications

General

Category	Boiler
Brand	Triangle Tube
Model	Prestige Solo 399
Fuel Type	Natural Gas or Propane
Maximum Input (BTU/hr)	399, 000
AFUE	95%
Boiler Type	Condensing
Heat Exchanger Material	Stainless Steel
Warranty	10 years
Vent Size	4 inch

Summary

Product & Safety Information

Definitions

Explains terms used in the manual to highlight hazards or important information.

Pre-Installation Items

General Requirements

Covers compliance with local codes and using specified components.

Vent/Air System Kit Components

Lists required parts for system completion and identifies optional components.

Vent/Air System Installation

Clearance Requirements & Termination Location

Details essential clearances and factors for selecting the vent termination point.

Boiler Adapter & Vent Joint Assembly

Instructions for installing the boiler adapter and assembling vent system joints correctly.

Termination & Support Plate Installation

Steps for mounting the termination fitting and interior/exterior support plates.

Pipe Cutting & Fire Stop Plate Usage

Guidance on cutting vent pipes and using fire stop support plates for penetrations.

Multiple Vent Systems & Pipe Adjustments

Instructions for multi-boiler setups and adjusting pipe lengths for custom fits.

Maintenance Procedures

Inspect Vent/Air System

Guidance on visually inspecting the vent/air system annually for issues.