To Next PageTo Next Page
Need help?Do you have a question about the TriangleTube PRESTIGE Excellence 110 and is the answer not in the manual?
General| Brand | TriangleTube |
|---|---|
| Model | PRESTIGE Excellence 110 |
| Category | Boiler |
| Language | English |
Crucial safety guidelines for safe installation and operation.
Details applicable local, state, national, and provincial codes for installation.
Guides on selecting an appropriate and safe location for the boiler installation.
Identifies contaminants that can damage the unit and affect performance.
Specifies ventilation and combustion air requirements for direct vent installations.
Details ventilation and combustion air needs for Category IV appliances.
Mandates installation of CO detectors and specifies placement and type for safety.
Specific MA code for CO detector installation, including placement and compliance.
Outlines essential rules for plumbing installation, including codes and support.
Details the installation and discharge piping requirements for the pressure relief valve.
Instructions for properly installing the vent and combustion air system, emphasizing airtightness.
Step-by-step guide for installing the condensate drain assembly, ensuring proper function.
Details on connecting the gas supply, including shutoff valves, sediment traps, and leak testing.
Guidance on natural gas piping, including sizing and supply pressure requirements.
Specifies required inlet gas pressure and regulator needs for natural gas.
Information on propane gas piping, including conversion kits and supply pressure.
Guides on connecting thermostats for multiple zones and setting anticipators.
Explains the various status messages displayed on the ACVMax unit for operation and diagnostics.
Introduces the EZ Setup feature for quick and easy installation customization.
Guides for customizing central heating settings using the EZ Setup feature.
Steps to select central heating demand type when no outdoor sensor is present.
Steps to select central heating demand type when an outdoor sensor is connected.
Guides for customizing domestic hot water settings using the EZ Setup feature.
Details the lockout screen that appears when a problem occurs and how to access details.
Lists and describes manual reset lockouts, their codes, and messages.
Lists and describes automatic reset lockouts, their codes, and messages.
Specifies requirements for boiler water quality, including pH, hardness, and contaminants.
Emphasizes safety checks for gas leaks before and during operation.
A checklist of critical items to verify before initiating the boiler's start-up sequence.
Procedures for starting up the PRESTIGE Excellence boiler and troubleshooting common issues.
Verifies installation and operational readiness of the boiler and its connected systems.
Confirms the proper installation and operation of carbon monoxide detectors.
Recommends checking gas piping for leaks using odorant or detection devices.
Guides on checking flame pattern, performing combustion tests, and adjusting settings.
Explains how to test the high temperature limit function and confirm lockout behavior.
Lists annual maintenance tasks to be performed by a qualified service technician.
Outlines periodic and monthly maintenance tasks for the homeowner.
Provides detailed instructions for service technician maintenance tasks.
Details how to inspect and test the boiler's pressure relief valve.
Directs to perform start-up and checkout procedures as outlined in other chapters.
Instructions for inspecting burner flame pattern, performing disassembly, and cleaning.
Refers to sections for measuring combustion levels and burner adjustments.
Detailed procedures for shutting down the boiler and cleaning the heat exchanger.
Verifies the presence and proper operation of carbon monoxide detectors.
Provides a table summarizing key performance and specification data for the Excellence 110.
