TriangleTube Instinct Solo Series Application Guide

Instinct
Application Guide
3
1. Boiler Pump Presets
The boiler comes precongured for several preset pump
outputs.
1. To access the Installer screen, touching simultane-
ously the up and down soft keys for 3 seconds as
shown in Fig. 1.
Fig. 1: Installer Button
2. Enter the installer access code “054” by using the
LEFT and RIGHT buttons to select a digit and the
UP and DOWN buttons to change the digit. Press
the OK button to enter the access code.
Fig. 2: Installer Access Code
3. Press the OK button while the CH & DHW Settings
icon is highlighted.
Fig. 3: CH & DHW Settings
4. Press the OK button while the Boiler Settings icon
is highlighted.
Fig. 4: Boiler Settings
5. Press the OK button while the Pump Settings op-
tion is highlighted.
Fig. 5: Pump Settings
6. Press the OK button while the Pump Settings op-
tion is highlighted.
Fig. 6: Preset Pump Conguration
7. Scroll down the preset pump list and select one of
the following options shown in Table 1.
Fig. 7: Preset Pump Conguration

TriangleTube Instinct Solo Series Specifications

General

Brand	TriangleTube
Model	Instinct Solo Series
Category	Boiler
Language	English