TriangleTube Instinct Solo Series Application Guide

Instinct
Application Guide
5
3. Flexible Pump Configuration
This allows the installer to customize the exible Pump
Output (relays) to a specic installation arrangement
that is not addressed in the Preset Pump Conguration
options. There is a total of six Pump Output(relays) that
must be set.
1. To access the Installer screen, touching simultane-
ously the up and down soft keys for 3 seconds as
shown in Fig. 8.
Fig. 8: Installer Button
2. Enter the installer access code “054” by using the
LEFT and RIGHT buttons to select a digit and the
UP and DOWN buttons to change the digit. Press
the OK button to enter the access code.
Fig. 9: Installer Access Code
3. Press the OK button while the CH & DHW Settings
icon is highlighted.
Fig. 10: CH & DHW Settings
4. Press the OK button while the Boiler Settings icon
is highlighted.
Fig. 11: Boiler Settings
5. Press the OK button while the Pump Settings op-
tion is highlighted.
Fig. 12: Pump Settings
6. Press the OK button while Flexible Pump Config
option is highlighted.
Fig. 13: Flexible Pump Cong

TriangleTube Instinct Solo Series Specifications

General

Brand	TriangleTube
Model	Instinct Solo Series
Category	Boiler
Language	English