Tribe PASS - Page 4

Trïbe Technologie – PASS Manual Page 4
Front
-PWR: Use to power up the Master PASS system.
-SD card slot: Insert the SD card supplied with the system into this slot. (Any SD card
of 1 GB minimum can be used, but first needs to be formatted with our provided editor
program)
-Active In: ¼” input (Unity Gain Buffer), maximizes quality from your pick-ups,
minimizes noise, and allows the split of the signal so it can be sent to multiple devices.
Connecting in this input disconnects the back ACTIVE, and sends the signal internally to
the IN 1 and to the PASS/ACT OUT in the back. (See internal connection section for
more details)
-Passive IN: ¼” input, the signal is directly sent to PASS/ACT OUT in the back. (See
internal connection section for more details)
-Back/Cancel button: Cancels any changes that haven’t been saved.
-Menu/Save button: Allows to save changes and to edit the main menu.
-Edit/Enter knob button: Internal controller if you don’t use an external controller for
Program Change (PC). Allows to edit the main menu and the name of the preset.
-LCD screen: Displays the preset number and name currently in use. Displays the main
menu.
-0 to 29 buttons: Allows to change state (On/Off) of the 24 loops and 6 channels (Loop
24 to 29).
-LED: Displays the state (On/Off) of each loop and channel.