Tribe PASS - Page 8

Trïbe Technologie – PASS Manual Page 8
Programming
There are 2 ways to program your unit: by computer or directly on the unit. All unit programming
and configurations are saved directly on the SD card (1 GB minimum), so you can have several
SD cards with different configurations for different shows or sections of a show.
Computer
First use:
For editing your SD card, you will find the «SD Editor for Windows» folder on the SD
card supplied with the unit. Copy and paste the complete folder «SD Editor for
Windows» on your hard disc to the desired location. In the folder «SD Editor for
Windows» copied on your hard disc, double-click «Trïbe_Technologie.EXE» to start the
program.
- A window will open to choose the SD card to use. Click on the corresponding
card and click «continue». You are now in the main configuration program.
- The SD card supplied with the unit is formatted. If you need to format a
new SD card: Click on the «Settings» tab on the top, then click «Format SD
Card». WARNING: Formatting your SD card will erase all the information
which is stored there.
- Suggested tab order to use:
o «Settings», Midi Channel
o «Loop Names»
o «Loop Modes»
o «Loop Midi CC»
o «Program Configuration», all preset configurations.
o «Settings», back up data from SD card.
Tabs:
- «Program configuration»:
o «Choose program»: Click on the arrow to display the menu. This menu
allows you to choose the preset you want to edit.
o «Name»: Allows you to give a name to your preset. Maximum 36
characters. This name will be displayed on unit LCD when the preset is
selected.
o «LCD preview»: Allows you to preview the display on the LCD.
o «Copy active program configuration to another program»: Copy
preset name and loop configuration to another preset.
o «Active Loops»: Put a hook on each loop that you want to be activated
when this preset is called.
o «Reload selected program configuration from SD»: Allows loading the
selected preset from the SD card.
o «Save selected program configuration to SD»: When your loop
configuration is done, click this button to save the loop configuration on
the SD card. You will lose your preset configuration if you change presets
without first saving on the SD card.