TROUBLE SHOOTING
1) No Power.
Ensure the unit is selected for the correct mains voltage via the selector incorporated in the mains
inlet socket on the back of the unit. Check the fuse (also in the mains inlet socket) if the unit has
been powered with the wrong voltage.
Check there is a mains supply reaching the unit.
2) The microphone doesn't work.
Is it connected to the correct input on the back of the unit?
Is the '+48V' phantom power switched on (for condenser microphones)?
Is the input selected to 'Mic' ('LINE' switch not depressed)?
Make sure the 'Mic' input level control is turned up.
3) The line input doesn't work.
Is it connected to the correct input on the back of the unit?
Is the input selected to 'LINE'?
Make sure the 'Line' input level control is set to '0'.
4) The equaliser doesn't work.
Is the 'EQ' switch selected to 'IN' (LED illuminated)?
11
To Next Page
Loading...
