EasyManua.ls Logo

Trident MINI-2 - Safety Precautions; Power and Operational Safety; Handling and Maintenance Safety

Trident MINI-2
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TRIDENT AIR MINI-2
www.tridentair.sg pg. 8
SAFETY PRECAUTIONS
ABOUT POWER
1. Only make use of three-pin sockets that adhere to the nameplate's standard voltage.
2. If the power cord, plug, or power socket are damaged, do not use this product.
3. You must hold the plug when unplugging the electricity rather than pulling the cord to prevent electric
shock or fire from a short circuit.
4. Regularly remove any dust from the power plug.
5. The manufacturer or trained maintenance employees must replace the power cord if it is damaged.
WHEN IN USE
1. Never operate the machine without filters in place.
2. Avoid sticking your fingers or other objects inside the air intake or outlet.
3. Avoid obstructing the air intake or outlet.
4. Avoid touching or putting anything near a heat source (such as heating stove and other places that
may be exposed to flammable gas).
5. You should disconnect the power cord from the wall socket right away if there is any smoke, stench,
or other malfunctions.
SERVICE RESTRICTIONS
1. To prevent electric shock, fire, and other harm, never use equipment in a space filled with flammable
gases such as hydrogen, natural gas, propane, etc.
2. To prevent electric shock, fire, or other damage, do not use it in unstable locations such as easy-
dumping, hot, humid, or wet locations such as bathrooms.
ABOUT MOVING
1. When moving the machine, ensure that it is unplugged.
2. To prevent the machine from falling and injuring people, grab the handle on the side of the machine
while moving; do not hold the front panel.
NOTICE FOR CLEANING
1. Never wash the carbon filter with water.
2. Use caution when cleaning the equipment because harsh detergents that are corrosive will scratch the
surface.
3. Always use soft cloths to wipe machine surfaces; otherwise, they risk being fractured or damaged.
4. Avoid using alcohol or other organic solvents to clean the device because doing so could harm it or
result in electric shock, fire, etc.
5. Please unplug the machine from the electrical outlet while cleaning or not using the machine, as doing
so could result in an electric shock or a fire from a short circuit.

Related product manuals