EasyManua.ls Logo

Tridonic BASIC Series User Manual

Tridonic BASIC Series
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.tridonic.com
1
Subject to change without notice. Information provided without guarantee.
Data sheet 09/22-EM080-23
Emergency lighting units
EM converterLED
Product description
Self contained emergency lighting LED driver for manual testing
For LED modules with a forward voltage of 50 – 250 V
Low profile casing (21 x 30 mm cross-section)
For luminaire installation
Nominal lifetime up to 100,000 h
5 years guarantee (conditions at www.tridonic.com)
Properties
Non maintained operation
1 or 3 h rated duration
Operating time selectable with plug (duration link)
Compatible with all dimmable and non-dimmable constant
current LED driver (see chapter 5.4)
3-pole technology: 2-pole LED module changeover
and delayed power switching for the LED driver
Automatic shutdown of output if LED load is out of range
Constant power output
Maximum light output for all LED modules
Electronic charge system
Deep discharge protection
Short-circuit-proof battery connection
Polarity reversal protection for battery provided by 3-pole
connector
Automatic detection of the connected battery technology
(NiMH or LiFePO
4
batteries)
Batteries
High-temperature cells
NiMH or LiFePO
4
batteries
LA or 18650 cells
4-year design life for NiMH batteries
1-year guarantee for NiMH batteries
4 – 8 years design life for LiFePO
4
batteries
3 years guarantee for LiFePO
4
batteries
For battery compatibility refer to chapter 7.1
È
Standards, page 6
Wiring diagrams and installation examples, page 7
EM converterLED BASIC MH/LiFePO4 250 V
BASIC series
Question and Answer IconNeed help?

Do you have a question about the Tridonic BASIC Series and is the answer not in the manual?

Tridonic BASIC Series Specifications

General IconGeneral
Input Voltage220-240 V
LifespanUp to 50, 000 hours
Operating Frequency50/60Hz
Power Factor>0.9
THD<10%
Protection ClassII
Operating Temperature-20°C to +50°C
DimmingNo

Summary

Thermal Details and Lifetime

Installation / Wiring

Wiring Diagram

Diagrams showing connections for LED modules, drivers, and batteries for different configurations.

Electrical Values

Maximum Loading of Automatic Circuit Breakers

Table specifying circuit breaker types and required installation cross-sections.

Insulation Matrix

Indicates basic vs. double/reinforced insulation for various connections.

Functions

Battery Data

Battery Selection

Lists compatible NiMH and LiFePO4 battery types, designs, and capacities.

Battery Charge / Discharge Data

Provides initial, fast, and trickle charge parameters for different battery types.

Safety

Covers deep discharge, overcharge, short-circuit, and overtemperature protection.

Related product manuals