5.3.2. Presence detection process
Nr.
Name
Range of
values Description
Adjustments
via...
(1)
Fade-in time 0.7 -
90.5 s
(default:
0.7 s)
Time that starts as soon as the presence of a person is detected.
During the fade-in time the luminous intensity is faded up to the
presence value.
mC
1
(2) Run-on time 30 s -
60 min
(default:
depending
on profile)
Time that starts as soon as the presence of a person is no
longer detected. If the presence of a person is detected again
during the run-on time the run-on time is restarted from zero. If
no presence is detected during the run-on time the fade time is
started as soon as the run-on time expires.
mC
1
and Pr
2
(3) Fade time 0.7 -
90.5 s
(default:
5.6 s)
Time during which the luminous intensity is faded from the
presence value to the absence value.
mC
1
(4) Switch-off delay 0 s -
infinite
(default:
depending
on profile)
Time during which the absence value is held before the lighting
is switched off. Depending on the profile selected the switch-off
delay may have different values or may not be defined.
mC
1
and Pr
2
(5) Fade-out time 0.7 -
90.5 s
(default:
5.6 s)
During the fade-out time the luminous intensity is faded out
from absence value to shutdown.
mC
1
(A) Presence value 1 - 100 %
(default:
depending
on profile)
Luminous intensity when persons are present. mC
1
and Pr
2
I NOTICE
If the light regulation is active, the light will first switch to
the presence value, but then the light regulation starts and
dims the light up or down, depending on the measured lux
level.
To Next Page
Loading...
Need help?
General