Trilithic 360 DSP User Manual

360 DSP - Operation Manual, Wi-Fi Option
17
This chapter:
 Describes the setup of the Wi-Fi Option
Wi-Fi Setup Procedure
Perform the following steps to setup the optional Wi-Fi:
1. Power on the 360 DSP by pressing the Power
button.
2. The Welcome screen will appear as shown in
the image to the right.
3. Use the touchscreen to select the user profile
that you would like to use.
4. By default, the Autotest navigation menu will
appear as shown in the image to the right.
5. Use the touchscreen to select the Setup softkey
at the bottom of the screen.
6. The Setup navigation menu will apper, use the
touchscreen to select the Setup icon as shown
in the image to the right.
2. Wi-Fi Setup
Chapter 2

Trilithic 360 DSP Specifications

General

Brand	Trilithic
Model	360 DSP
Category	Measuring Instruments
Language	English