5
3. Press and release the button that corresponds to the access
number. For example, press the (1 / 2) button for access #1
and press the (3 / 4) button for access #2. The keypad will
provide a confirmation beep after this single button press.
4. Enter the new 5 digit access code after this single button press.
5. Re-enter the new 5 digit access code. The keypad will provide
confirmation beeps.
Repeat process to assign additional access codes.
Note: Up to 5 different access codes can be assigned at one time. As
additional access codes are defined, pre-existing access codes are
overwritten. For example, if a new access code is assigned for access
#3, the previous access #3 code is no longer valid.
The following area can be used to document the access code
assignments.
Access
#
User Name Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
1
2
3
4
5
This product has been manufactured with methods to ensure high
quality and to meet the high expectations of our customers. TriMark
warrants this product to be free from workmanship defects and will
remedy issues per TriMark's warranty policy.
Remote transmitter FOBs, batteries, and other equipment subject to
normal wear and deterioration may need to be replaced periodically by
dealer and/or end user and are not covered by this warranty. TriMark
will not be liable for indirect, special, incidental or consequential
damages.
Contact TriMark for specific mounting details, such as drawings,
placement suggestions, mounting hardware, etc.
To Next Page
Loading...
