Trimble M3 Total Station User Guide 113
Data Transfer 9
9.1 Uploading data from an office computer to the internal
memory
1. Press [2] Periph-MEM in the DATA TRANSFER
menu to open the
MEM-Periph screen. The job
to which you will upload data appears.
2. Do one of the following:
– To open the job list, press
[F1] Job and
select a job to upload data
–To go to the
Setting Interface
screen, press
[F2] Int.
– To start uploading data from the office
computer, press
[F4] o.k.
To stop the process, press [ESC].
When the transmission is completed, the
result appears.
90.1 Nikon data fields
If you set the Format as Nikon in [MENU] [6] Setting
Interface
, detailed format information appears in
the
Periph.-MEM screen.
To edit the Nikon data fields:
• In the Periph.-MEM screen, press [F3] Edit. The
Data Fields screen appears.
The Nikon format is a simple comma-delimiter or
space delimiter text file of coordinates. You can freely
define the elements and their order.
Do one of the following:
• To change the item in each field, press [F2] or [F3].
• To finish editing, press [F4] o.k.
To Next Page
Loading...