Trimble M3 Total Station User Manual

2 Overview of the Trimble M3 Total Station
22 Trimble M3 Total Station User Guide
21.2 HOT MENU overview
To access the HOT MENU, press . In any measurement screen, you can use the HOT
MENU to change the point number and point code and the EDM mode, or check
recorded data.
2.2 Principles of display
The following are typical program screens:
• Basic Measurement Screen (BMS)
• Input screens
• Menu screens
Menu item Sub-menu Description
1. EDM Settings Set distance precision. See Distance measurement settings (EDM),
page 39.
2. DR / PR Mode Select measure mode. See Changing target mode (DR or Prism),
page 40.
3. Elec. level Display the bubble and change tilt correction. See Bubble level
display (electric level), page 40.
4. Sett. Corr. Prism const. Input prism constant. See Configuring error corrections, page 40.
Temperature Input temperature.
Pressure Input pressure.
Scale Input scale factor.
C&R corr. Setting for curvature and refraction correction.
Sea level corr. Select sea-level correction.
5. P/C Input point number and code to prepare for the next recording
point. See Selecting a point name and point code, page 41.
6. Target Select a target set (a combination of target height and measure
mode). See Selecting a target configuration, page 41.
7. Edit Internal Memory See Editing data, point number lists or point code lists, page 42.
Point Number List See Managing your list of point names, page 44.
Point code list See Managing your list of point codes, page 45.

Trimble M3 Total Station Specifications

General

Brand	Trimble
Model	M3 Total Station
Category	Measuring Instruments
Language	English