TRIOBIKE CARGO - Display Controls

USING THE SYSTEM MARQUARDT COMFORT PLUS DISPLAY
- To activate the walk assist, just press for 2 seconds the “^” button on the handlebar
control. The bike will slowly move by itself, without pedalling.
IMPORTANT: the walk assist works only when the assistance level is
set to 1 or more.
- Integrated lights can be switched on and off by pressing the specific button.
If the AUTO LIGHT MODE is on, lights will turn on and off automatically according to the
environment luminosity.
- The operating unit features several functions that can be selected through the navigation
joystick. To have a complete overview please read the specific operating unit manual.
WALK ASSIST PRESS FOR 2 SECS
NAVIGATION JOYSTICK
LIGHTS
POWERINCREASE
SUPPORT
LEVEL
DECREASE
SUPPORT
LEVEL
24
ESYSTEM
WALK ASSIST PRESS FOR 2 SECS
LIGHTS
POWER
INCREASE
SUPPORT
LEVEL
MENU
DECREASE
SUPPORT
LEVEL
USING THE SYSTEM BROSE ALLROUND DISPLAY
- To turn on the system, press the power button.
- Choose the desired assist level by pushing the “+/-” on the handlebar control. Choose
between ECO, TOUR, SPORT and BOOST. To make the bike move with electric assistance
you just have to pedal.
- To activate the walk assist, just press for 2 seconds the specific button.
IMPORTANT: the walk assist works only when the assistance level is
set to ECO or more.
- Integrated lights can be switched on and off pressing the specific button.
- To turn off the system, press the power button on the handlebar control for 3 seconds.
When the display is off, the complete system is off too.
25
ESYSTEM