14
SAFETY CHECKLIST
Before every ride, it is important to carry out the following safety checks. Do not ride a
bicycle that is not in proper working condition!
ACCESSORIES
- The reflectors are properly placed and not obscured.
- All other fittings on the bike are properly and securely fastened, and functioning (e.g.:
lights).
- Rider’s and passenger’s clothing and items are properly constrained and not loose.
BEARINGS
- All bearings are lubricated, run freely and display no excess movement, grinding or
rattling.
BRAKES
- The front and rear brakes work properly.
- The brake control cables are lubricated, correctly adjusted and display no obvious wear.
- The brake control levers are lubricated and tightly secured to the handlebar.
CHAIN
- The chain is oiled, clean and runs smoothly.
CRANKS AND PEDALS
- The pedals are securely tightened to the crank arms.
- The crank arms are secured to the axle and are not bent.
FRAME
- The frame is not bent or broken.
- The quick-release clamps are locked in place.
STEERING
- The handlebar and post are correctly adjusted and tightened, and allow proper steering.
- The handlebar binder bolt is tightened.
WHEELS AND TIRES
- The wheels are properly attached to the bicycle and axle.
- The tires are properly inflated within the recommended pressures displayed on the tires
sidewall.
- The tires have the proper amount of tread, no bulges or excessive wear.
15
To Next Page
Loading...
