16
QUICK RELEASE SEAT CLAMP
- Unlock the quick-release lever.
- Adjust the seat height up or down until the rider feels that he/she has control of the
bicycle and are comfortable.
IMPORTANT: be sure the minimum insertion marks do not go past
the top of the seat clamp and are not visible.
- Try to close the quick-release lever. If it closes easily, open it up and tighten the
adjustment nut further. If it’s too difficult to close, open the quick release lever up and
loosen the adjustment nut a little and try again.
DO NOT ATTEMPT TO TIGHTEN BY TURNING THE QUICK-
RELEASE LEVER. THE QUICK-RELEASE LEVER IS FOR CLOSING,
THE ADJUSTMENT NUT IS FOR ADJUSTING THE PRESSURE.
IMPORTANT: you should feel resistance when you close the quick-
release lever and should leave a temporary impression on your
fingers. Open and close the handle to ensure the seat is securely
locked in place.
17
To Next Page
Loading...
