11
12
Using E-TTL and Autoflash in the shooting Modes
Just set camera’s shooting mode to <AV/A>(aperture -priority AE),
<TV/S>(shutter-priorityAE),or<M>(manual)and you can use E-TTL/
i-TTL autoflash.
Select this mode when you want to set the shutter speed manually.
The camera will then automatically set aperture matching the
shutter speed to obtain a standara exposure.If the aperture display
blinks,it means that the background erposure will be underexposed
or overexposed. Adjust the shutter speed until the aperture display
stops blinking.
Select this mode when you want to set the aperture manually.
The camera will then automatically set the shutter speed matching
the aperture to obtain a standard exposure.If the background is
dark like a night scene ,a slow sync speed will be used to obtain a
standard exposure of both the main subject and background.
Standard exposure of the main subject is obtained with the
flash,while a standard exposure of the background is obtained
with a slow shutter speed.Since a slow shutter speed will be
used for low-light scenes, using a tripod is recommended. If
the shutter speed display blinks, it means that the background
exposure will be underexposed or overexposed.Adjust the
aperture until the shutter speed display stops blinking.
Select this mode if you want to set both the shutter speed and
aperture manually. Standard erposure of the main subject is
obtained with the flash.The exposure of the background is
obtained with the shutter speed and aperture combination
you set.
AV
AV/A
M
M
TV
TV/S
P
I
f y
o
u u
s
e t
h
e <
D
E
P
>
o
r <A
-
D
E
P
>
s
h
o
o
t
i
n
g m
o
d
e
, t
h
e r
e
s
u
l
t w
i
l
l b
e t
h
e
same as using the <P>(P AE)mode.rogram
Flash Sync Speeds and Apertures Used
Shutter Speed Setting
Aperture Setting
Set automatically(1/60 sec.~1/Xsec.)
Automatic
Manual
Automatic
Manual
Set automatically(30 sec.~1/Xsec.)
Set manually(buLb,30 sec.~1/Xsec.)
Set manually(30 sec.~1/Xsec.)
1/X sec.is the camera’s maximum flash sync speed.
To Next Page
Loading...