Tripp Lite B022-002-KT-R User Manual (English)

Questions and Answers:

C
Carolyn CarrAug 12, 2025
What to do if the keyboard is not responding on my Tripp Lite B022-002-KT-R?
- X
  Xavier SmithAug 12, 2025
  If the keyboard is not responding when connected to the Tripp Lite Switch, there are several potential solutions: * Try unplugging the keyboard from the Switch and then plugging it back in to reset it. * Try turning off the PCs connected to the Switch, waiting 5 seconds, and then turning them back on to reset the Switch. * If the Switch is in Auto Scan Mode, press the [Spacebar] on a 4-port model or any manual port selection switch on a 2-port model to exit this mode. * If you switched between PCs during the boot-up procedure, shut down the PC and reboot without switching.
G
Gloria PetersonAug 17, 2025
How to fix video problems with my Tripp Lite B022-002-KT-R?
- T
  Traci JohnsonAug 17, 2025
  Video problems with your Tripp Lite Switch can arise from a few sources. Ensure that the resolution and bandwidth settings are within the supported range; the Switch supports VGA, SVGA, Multisync, and XGA (interlaced) monitors with resolutions up to 2048 x 1536 Hz. Also, electromagnetic interference from nearby power sources or poorly insulated devices can cause issues. Try moving the interfering device or repositioning the KVM switch and its cables.
S
Samantha DennisAug 25, 2025
Why am I having video problems with my Tripp Lite B022-002-KT-R?
- P
  Peter YorkAug 25, 2025
  If you are experiencing video problems with your Tripp Lite Switch, it may be due to electromagnetic interference from a nearby power source or poorly insulated device. To resolve this, try moving the interfering device away from the KVM switch and its cables, or move the KVM switch and/or its cables away from the source of interference.
F
felicia60Aug 30, 2025
Why is my Tripp Lite Switch mouse not responding?
- J
  jbarrettAug 30, 2025
  Your Tripp Lite Switch mouse might not be responding for several reasons. It could be that the mouse needs to be reset by unplugging it from the Switch and plugging it back in. Alternatively, the Switch itself may need a reset: turn off the PCs, wait 5 seconds, and then turn them back on. Ensure you are using a compatible PS/2 mouse, as a serial mouse with an adapter may not work unless it's a combo-mouse set up for PS/2 mode with its original adapter. Also, verify that each PC uses the correct mouse driver for the connected mouse. Some newer mice with unique drivers may not be supported; try a regular mouse with a generic driver.
U
ujonesSep 5, 2025
What to do if my Tripp Lite Switch keyboard is not responding?
- P
  Patricia AlexanderSep 5, 2025
  If your Tripp Lite Switch keyboard is not responding, there are a few potential causes. First, try resetting the keyboard by unplugging it from the Switch and plugging it back in. If that doesn't work, try resetting the Switch by turning off the PCs, waiting 5 seconds, and then turning them back on. Also, check if the Switch is in Auto Scan Mode; if it is, press the [Spacebar] on a 4-port switch or any manual port selection switch on a 2-port switch to exit this mode. Finally, avoid switching between PCs during the boot-up procedure; shut down the PC and reboot without switching.

Tripp Lite B022-002-KT-R Specifications

General

Device Type	KVM Switch
Number of Ports	2
USB Ports	2
Audio Support	Yes
Hotkey Support	Yes
PC Connections	2
Console Connections	1
Number of Monitors Supported	1
Compatibility	Windows, Mac, Linux
Power Source	USB powered
Operating System Compatibility	Windows, Mac, Linux
Switching Method	Hotkey, Push Button
Port Type	USB
Cable Length	6 ft