8
Safety Instructions
• If the following conditions occur, unplug the device from the wall outlet and bring it
to qualified service personnel for repair.
o The power cord or plug has become damaged or frayed.
o Liquid has been spilled into the device.
o The device has been exposed to rain or water.
o The device has been dropped, or the cabinet has been damaged.
o The device exhibits a distinct change in performance, indicating a need for
service.
o The device does not operate normally when the operating instructions are
followed.
• Only adjust controls covered in the operating instructions. Improper adjustment of
other controls may result in damage that will require extensive work by a qualified
technician to repair.
• Do not connect the RJ11 port on the KVM marked UPGRADE to a public
telecommunications network.
• The device is designed for IT power distribution systems with 230V phase-to-phase
voltage.
• To prevent damage to your installation, it is important that all devices are properly
grounded.
17-10-479-93370A.indb 8 11/17/2017 2:28:58 PM
To Next Page