4
Installation
1. Connect the included USB Mini-B cable between
the USB Mini-B port on the unit and an available
USB-A port on the laptop.
2. Connect the built-in USB cable to an available
USB-A port on the computer you wish to access
with the laptop.
3. Connect the built-in VGA cable to an available VGA
port on the computer you wish to access with the
laptop.
4. When a successful connection between the laptop
and the connected computer is established, the
Blue LED will illuminate.
5. Upon connection, generic drivers for the product
automatically install and it will be recognized as a
removable disk drive. A prompt will appear asking if
you wish to open it.
Note: If the prompt does not appear, go to your My
Computer screen to access it.
6. To establish a connection with the connected
computer, open the drive folder. Two files will
appear, one of which is a Windows client. Open the
Windows client file.
Note: To ensure full functionality, run the Windows Client as
an administrator.
7. The client will open a remote session with the
connected computer and the remote view window
will appear.
17-10-489-933694-EN.indd 4 12/4/2017 10:35:45 AM
To Next Page
Loading...
Need help?
General
