5
Product Description
Receiver Unit
6
Power Input: Connect the included power supply adapter to power
the Receiver Unit
7
Wireless Indicator: LED will illuminate green when a signal is
received
8
Data Transmission Indicator: LED will blink green when data is
transmitting
9
HDMI Output (Female): Use an HDMI cable (not included) to
connect to the HDMI display
10
IR-IN (Rx) Port: Use the included IR-IN (Rx) cable to connect to this
port for remote control of the source device
Note: Make sure the source remote control is within the required range of IR
receiver
11
Antenna: Connect the included antenna blade to receive wireless
signals
IR IN
HDMI
OUTPUT
DC 5V, 2A
11
6 7 8 9
10
To Next Page
Loading...
