Tripp Lite B126-1D1-WHD1 User Manual

6
Installation
Notes:
• Make sure all equipment being connected is powered off prior to installation.
• Make sure to position the IR cables near the source device and HDMI display for
best results.
• If the wireless signal is obstructed by walls (especially brick or glass) or other
sources of interference, the quality and distance of the signal will likely be re-
duced.
HDMI Source Device
IR-OUT Cable USB Wall Charger IR-IN Cable
Mini Transmitter Unit Receiver
Unit
HDMI Display
HDMI Cable
Mini Transmitter Unit
1
Connect the built-in HDMI connector on the Mini Transmitter Unit to
the HDMI source device.
Note: If experiencing a weak signal or signal loss, use the Right-Angle HDMI
Adapter to connect the Mini Transmitter Unit to the HDMI source device. The
Right-Angle HDMI Adapter will put the Mini Transmitter Unit in a vertical position
to strengthen the signal.
1
2
5
6
8
7

Tripp Lite B126-1D1-WHD1 Specifications

General

Brand	Tripp Lite
Model	B126-1D1-WHD1
Category	Extender
Language	English