To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite PDU15NETLX and is the answer not in the manual?
General| Model | PDU15NETLX |
|---|---|
| Input Current | 15A |
| Maximum Output Current | 15A |
| Output Receptacles | NEMA 5-15R |
| Receptacle Type | NEMA 5-15R |
| Cord Length | 15 ft. |
| Maximum Load Capacity | 1800W |
| Network Management | Yes |
| Remote Monitoring | Yes |
| Power Delay | Configurable |
| Mounting | Rackmount |
| Rack Units | 1U |
| Form Factor | Vertical |
| Input connection type | NEMA 5-15P |
| Output connection type | NEMA 5-15R |
Details three primary mounting configurations: OU Rack, Wall, and Under-Counter.
Explains how to connect the input power cord and equipment power cords.
Describes the permanently attached AC input power cord with a NEMA 5-15P plug.
Details the output receptacles and their associated LEDs indicating live AC power.
Mentions the use of brackets for mounting the PDU.
Details the Ethernet Port, RJ45 Configuration Port, USB Type-A Port, and Reset Button.
Explains the meaning of different status LEDs for the Network Interface.
Explains remote monitoring and control via Web browser, telnet, and SNMP.
Details the product warranty terms, limitations, and exclusions.
Instructions on how to register the Tripp Lite product online.
Provides FCC compliance information for Class A digital devices.
Explains how to find and use the product's unique series number for compliance.
Information on WEEE directive compliance for EU customers.
