To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite PDUMVR20NET and is the answer not in the manual?
General| Model | PDUMVR20NET |
|---|---|
| Category | Power Distribution Unit |
| Input Frequency | 50/60Hz |
| Output Outlets | 20 |
| Maximum Output Current | 20A |
| Monitoring | Yes |
| Remote Management | Yes |
| Network Management | Yes |
| Interface Port | RJ45 |
| Voltage Monitoring | Yes |
| Current Monitoring | Yes |
| Power Monitoring | Yes |
| Form Factor | Rackmount |
| Rack Units (RU) | 1U |
| Mounting | Horizontal |
| Outlet Type | IEC 60320 C13 |
| Network Interface | Ethernet |
| Environmental Monitoring Port | Yes |
| Operating Temperature | 0 to 40°C |
| Operating Humidity | 0-95%, non-condensing |
| Safety Certifications | CE |
Essential warnings and guidelines for safe installation and operation of the PDU.
Covers methods for securing the PDU in a rack.
Instructions for connecting the PDU to power and equipment.
Steps for assigning an IP address automatically via DHCP.
Procedures for manually setting a static IP address for the PDU.
Steps to configure PDU network settings using terminal emulation.
Setting up IPv4, IPv6, DNS, and hostname for network connectivity.
