Tripp Lite SMART2200NET - Specifications - Output; Output Capacity; Output Voltage and Frequency; Voltage Regulation Accuracy

OUTPUT
Output Volt Amp
Capacity (VA)
2200
Output kVA capacity
(kVA)
2.2
Output Watt Capacity
(watts)
1700
Output kW capacity 1.7
Output power factor 0.8
Nominal Output
Voltage(s) Supported
120V
Frequency compatibility 60 Hz
Output voltage
regulation (line mode)
-13% / +5%
Output voltage
regulation (Battery
mode)
+/- 5%
Built-in UPS output
receptacles
6 5-15R outlet(s)
Built-in controllable
switched load banks
Two switchable single outlet 5-15R load banks
Output AC waveform
(AC mode)
Sine wave
Output AC waveform
(battery mode)
PWM sine wave
INPUT
Rated input current (at
maximum load)
15A
Nominal Input
Voltage(s) Supported
120V AC
UPS input connection
type
5-15P
Input circuit breaker 20A
UPS Input cord length
(ft.)
8
UPS Input cord length
(m)
2.4
Recommended
Electrical Service
20A 120V
Input cord length (ft.) 8
Input cord length (m) 2.4
BATTERY
Full load runtime
(minutes)
11 min. (1700w)