To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite SmartPro SMART2200RM2U and is the answer not in the manual?
General| Type | Line-Interactive |
|---|---|
| Input Voltage | 120 V |
| Output Voltage | 120 V |
| Number of Outlets | 8 |
| Interface Port | USB, Serial |
| Capacity | 2200 VA |
| Form Factor | Rackmount |
| Outlets | NEMA 5-15R |
| Battery Type | Sealed Lead Acid |
| Battery Run Time (Half Load) | 14.5 minutes |
| Runtime at Half Load | 14.5 min |
| Communication Ports | USB, DB9 Serial |
| Display | LED |
| Output Connections | NEMA 5-15R |
| Dimensions (H x W x D) | 3.5 x 19 x 20.5 inches |
| Weight | 52 lb |
| Input Frequency | 50 / 60 Hz |
| Output Frequency | 50 / 60 Hz |
Warnings about where to install the UPS for optimal performance and safety.
Warnings related to connecting the UPS to power sources and grounding.
Warnings about connecting equipment to the UPS and its implications.
Critical warnings concerning the UPS batteries, including handling and disposal.
Warnings specific to connecting external battery packs to the UPS.
Information and guidance on recycling Tripp Lite products and batteries.
Instructions for installing the UPS in rack cabinets, covering 4-post and 2-post configurations.
Guidelines for mounting the UPS in an upright tower orientation, including LCD panel adjustment.
Step-by-step instruction to connect the UPS to a power source.
Guidance on connecting peripheral devices to the UPS outlets.
Procedure for powering on the UPS system after installation.
Instructions for connecting the UPS to a computer via USB or RS-232 for monitoring and control.
Details on connecting the UPS to an Emergency Power Off circuit for shutdown control.
Procedures and considerations for connecting external battery packs to extend UPS runtime.
Explains the UPS LCD display, button functions, and basic operational modes.
Details the meaning of various icons and indicators displayed on the UPS.
How to view power conditions like voltage, load, runtime, and battery capacity.
Accessing and configuring UPS settings like alarms, brightness, self-tests, and display scrolling.
Viewing UPS events and adjusting power sensitivity for waveform distortion.
Managing external battery settings and performing a factory reset.
Description of the different types of AC outlets on the UPS rear panel.
Ports for connecting the UPS to a computer for management.
Port for connecting to an emergency power off circuit.
Slot for accessories and connector for external battery packs.
Guidelines for storing the UPS, including battery maintenance.
Procedures for obtaining service, including warranty and RMA information.
Step-by-step guide for replacing batteries in specific UPS models (RBC58-2U).
Instructions for connecting batteries, securing panels, and completing the replacement process.
Step-by-step guide for replacing batteries in specific UPS models (RBC94-2U).
FCC compliance statement for Class A digital devices.
Information on finding and using series numbers for compliance.
Explanation of voltage symbols used on product labels.
