To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite SmartPro SMART3000RMXL2U and is the answer not in the manual?
General| Type | Line Interactive |
|---|---|
| Output Power Capacity | 3000 VA |
| Output Power | 2700W |
| Input Voltage | 120V |
| Output Voltage | 120V |
| Form Factor | Rackmount |
| Number of Outlets | 8 |
| Nominal Output Voltage | 120V |
| Output Voltage Regulation (Line Mode) | +/- 5% |
| Input Frequency | 50/60 Hz |
| Input Connection Type | NEMA L5-30P |
| Typical Recharge Time | 8 hours |
| Interface Ports | USB, Serial |
| Network Management | Optional SNMP/Web Card |
| Frequency | 50/60 Hz |
| Waveform | Sine Wave |
| Warranty | 2 years |
| Output Receptacles | NEMA 5-15R |
| Battery Type | Sealed Lead Acid (SLA) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Operating Humidity | 0% to 95% non-condensing |
Detailed steps for securing shelves and equipment within a 4-post rack system.
Procedures for mounting the UPS in a 2-post rack using an optional installation kit.
Connecting the UPS to a computer for monitoring and control via serial or USB ports.
How to connect the UPS to an Emergency Power Off circuit for remote shutdown.
Instructions for connecting external battery packs to extend UPS runtime.
Explanation of the UPS's LCD panel layout, icons, and display readouts.
Describes the function of the main 3-digit display for showing various UPS values.
Details on how to turn the UPS on, cold-start, and turn it off using the power button.
Usage of the MODE button for navigating displays and control menus on the UPS.
Functionality of the ENTER/MUTE button for toggling settings and silencing alarms.
How to cycle through and interpret various power status displays on the UPS LCD.
Accessing and configuring UPS settings like alarm, brightness, self-test, and scroll.
Performing a self-test to verify UPS battery and system integrity.
Enabling automatic cycling through UPS operating conditions on the LCD.
Tracking and resetting the count of UPS events when running on battery power.
Tracking and resetting the count of Automatic Voltage Regulation events.
Adjusting input line sensitivity to manage UPS switching behavior.
Configuring the UPS to recognize or ignore external battery packs.
Restoring the UPS LCD settings to their original factory defaults.
Description of various rear panel ports and features like AC outlets and connectors.
Explanation of the different types of AC outlets and their functionality on the UPS.
Details on connecting the UPS to a computer for monitoring and control.
Information on the Emergency Power Off port for remote shutdown capabilities.
Location and purpose of the accessory slot for optional monitoring and control devices.
Connector for attaching external battery packs to the UPS.
Proper procedures for storing the UPS, including battery maintenance during storage.
Steps for troubleshooting, contacting support, and returning the UPS for repair or warranty service.
Specific procedure for replacing batteries in selected SMART3000RM2U/RMXL2U models.
Procedure for replacing batteries in SMART3000RM2U, SMART2600RM2U, and SMART2200RM models.
FCC compliance statement for Class A digital devices and user responsibilities.
How to find and use the product's unique series number for compliance identification.
