To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite SmartPro SMART3000RM2U and is the answer not in the manual?
General| Nominal Output Voltage | 120V |
|---|---|
| Output Voltage Regulation (Line Mode) | ±5% |
| Output Voltage Regulation (Battery Mode) | ±5% |
| Nominal Input Voltage | 120V |
| Battery Type | Sealed Lead Acid (SLA) |
| Topology | Line Interactive |
| Audible Alarm | Yes |
| Communication Interface | USB, Serial |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Output Power Capacity | 3000VA / 2700W |
| Input Frequency | 50 / 60 Hz |
| Output Connections | 8 NEMA 5-15R |
| Form Factor | Rackmount |
| Waveform Type | Sine wave |
| Operating Humidity | 0% to 95% (non-condensing) |
| Certifications | cUL, FCC Part 15 Class A |
| Warranty | 2 years |
| Typical Recharge Time | 8 hours to 90% capacity |
| Battery Recharge Time | 8 hours to 90% capacity |
Instructions for placing the UPS safely and ensuring proper ventilation.
Guidelines for connecting the UPS to power sources and avoiding damage.
Warnings regarding connecting equipment to UPS output and life support applications.
Precautions for handling UPS batteries, including shock and fire risks.
Cautions for connecting external battery packs, including compatibility and power.
Information and guidance on how to properly recycle UPS products and batteries.
Step-by-step guide for plugging the UPS into an outlet and turning it on.
Instructions for mounting the UPS unit in a 4-post rack system.
Details on the requirements and process for 2-post rack mounting.
Guidance on mounting the UPS vertically and adjusting the LCD panel.
Connecting the UPS to a computer for monitoring and control via serial ports.
How to connect the UPS to an Emergency Power Off circuit.
Instructions for connecting external battery packs to extend UPS runtime.
Overview of the LCD display, buttons (ON/OFF, MODE, ENTER/MUTE), and general status indicators.
Explains various icons and symbols shown on the UPS LCD display for different functions.
Accessing and adjusting settings like alarm, brightness, self-test, and scroll control.
Monitoring ON Battery/AVR events and adjusting power sensitivity settings.
Configuring external battery settings and resetting the UPS to factory defaults.
Description of rear panel ports like AC Outlets, Communications, EPO, and Accessory Slot.
Information on the output breaker and chassis ground connection points.
Guidelines for properly storing the UPS unit, including battery maintenance.
Procedures for obtaining service, warranty, and returning the product.
Step-by-step guide for replacing batteries in specific UPS models.
Step-by-step guide for replacing batteries in different UPS models.
FCC compliance statement for Class A digital devices.
Information on identifying the product's unique series number for compliance.
Explanation of symbols used on the product label (AC/DC voltage).
