Tripp Lite SmartPro UPS System SMART550USB User Manual

Owner’s Manual
1111 W. 35th Street Chicago, IL 60609 USA
Customer Support: (773) 869-1234 • www.tripplite.com
Important Safety Instructions
2
Quick Installation
3
Basic Operation
4
Storage & Service
7
Warranty Registration
7
SmartPro
®
UPS System
Model: SMART550USB
Copyright © 2006 Tripp Lite. All rights reserved. SmartPro
®
is a registered trademark of Tripp Lite.
Español
8
Français
16
WARRANTY
REGISTRATION:
register online today for a
chance to win a FREE Tripp Lite
product—www.tripplite.com/warranty
Not suitable for mobile applications.
200607096 93-2574 SMART550USB OM.qxd 8/14/2006 11:31 AM Page 1

Tripp Lite SmartPro UPS System SMART550USB Specifications

General

Output Power Capacity	330 W
Input Voltage	120 V
Output Voltage	120 V
Nominal Input Voltage	120 V
Input Frequency	50 / 60 Hz
Input Connection Type	NEMA 5-15P
Output Connections	6 x NEMA 5-15R
Battery Recharge Time	8 hours
Typical Recharge Time	8 hours
Typical Backup Time at Full Load	3 minutes
Interface Port	USB
Audible Alarm	Yes
Waveform Type	Simulated Sine Wave
Number of Outlets	6
USB Port	Yes
Display	No
Power Capacity	550 VA
Battery Type	Sealed Lead Acid
Data Line Protection	RJ45
Output Voltage Regulation (Line Mode)	±5%

Summary

Important Safety Instructions

UPS Location Warnings

Guidelines for installing the UPS indoors away from moisture, heat, dust, and direct sunlight, maintaining temperature and ventilation.

UPS Connection Warnings

Instructions on connecting the UPS to a grounded outlet, avoiding modifications, adapters, and extension cords to prevent damage and voiding warranty.

Equipment Connection Warnings

Advisories against using UPS for life-support applications and connecting surge suppressors or extension cords to the UPS output.

Battery Warnings

Precautions regarding electrical shock, short-circuit current, proper disposal, and the prohibition of opening the UPS or batteries.

Quick Installation

Connect to Electrical Outlet

Connect the UPS to a grounded AC outlet, ensuring it doesn't share a circuit with heavy electrical loads.

Connect Equipment to UPS

Plug computer and monitor into UPS/Surge receptacles for battery backup and surge protection.

Select UPS Operating Mode

Press the ON/OFF button to toggle the UPS between ON (LED lit) and OFF (LED not lit) modes.

Basic Operation

Buttons and Controls

Details on the ON/OFF button for switching operating modes, cold-starting the UPS, and using the MUTE/TEST button.

Indicator Lights

Explanation of status lights for LINE POWER, BATTERY POWER, REPLACE BATTERY, and OVERLOAD conditions.

Storage & Service

Storage Instructions

Guidance on disconnecting, deactivating, and periodically recharging the UPS for extended storage to maintain battery capacity.

Service and Support

Information on contacting Tripp Lite dealers or distributors for service and packing instructions for returns.

Warranty Registration