EasyManuals Logo

Triton TWSS10 Manual

Triton TWSS10
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
4
Thank you for purchasing this Triton tool. This manual contains information necessary for safe and effective operation of this product.
This product has unique features and, even if you are familiar with similar products, it is necessary to read this manual carefully to ensure
you fully understand the instructions. Ensure all users of the tool read and fully understand this manual.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable,
even with ear protection, stop using the tool immediately and check the ear
protection is correctly fitted and provides the correct level of sound attenuation
for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to
a chronic condition. If necessary, limit the length of time exposed to vibration
and use anti-vibration gloves. Do not operate the tool with hands below a
normal comfortable temperature, as vibration will have a greater effect. Use
the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to
EN60745 or similar international standards. The figures represent normal use
for the tool in normal working conditions. A poorly maintained, incorrectly
assembled, or misused tool, may produce increased levels of noise and
vibration. www.osha.europa.eu provides information on sound and vibration
levels in the workplace that may be useful to domestic users who use tools for
long periods of time.
Specification
Model number: TWSS10
Rating: 220V - 240V~, 50Hz, 120W
Drive: Induction motor
No load speed: 125min
-1
Sharpening stone: Ø250 x 50mm
Honing wheel: Ø230 x 30mm
Bore size: Ø12mm
Power cord length: 2m
Protection class:
Dimensions (L x H x W): 345 x 370 x 270mm
Weight: 14.5kg
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Caution!
Class I construction (protective earth)
For indoors use only (battery and battery charger)!
Environmental Protection
Waste electrical products and batteries, including Li-Ion batteries,
should not be disposed of with household waste. Please recycle
where facilities exist. Check with your local authority or retailer for
recycling advice.
WARNING: This product is heavy and as a
precaution it is advised that two people assemble
the machine.
Description of Symbols
WARNING
LIFTING HAZARD
Single person lift
could cause injury
Use assistance when moving or lifting
V Volts
~ Alternating current
A Ampere
n0 No load speed
Hz Hertz
W, kW Watt, kilowatt
/min or min
-1
(revolutions or reciprocation)
per minute
Technical Abbreviations Key
515970_Z1MANPRO1_AUS.indd 4 24/02/2015 17:02

Other manuals for Triton TWSS10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triton TWSS10 and is the answer not in the manual?

Triton TWSS10 Specifications

General IconGeneral
BrandTriton
ModelTWSS10
CategoryPower Tool
LanguageEnglish

Related product manuals